# Brembo Brake pad set P 61 122

> Rear pad set for the Peugeot 3008 1.5 BlueHDi

- **Brand:** [Brembo](https://car-parts-universe.superfast.shop/en/brands/brembo.md)
- **Art. no.:** P 61 122
- **Category:** [Brakes](https://car-parts-universe.superfast.shop/en/brakes.md) › Brake pads
- **Price from:** €32.90 excl. VAT (€39.81 incl. VAT)

## Summary

Brembo Prime rear pad set for the Peugeot 3008 1.5 BlueHDi, 99 x 50 x 18 mm for the Bosch caliper. It is supplied without a wear indicator, and the box holds anti-squeal shims, fitting accessories and caliper bolts.

## Fits

| Vehicle | Engine | Engine code | kW | Years | Position | Note |
|---|---|---|---|---|---|---|
| Peugeot 3008 II (P84) | 1.5 YHZ 131 hp | YHZ | 96 kW | 2018–2023 | Rear axle | For 268 mm discs. |

## OE numbers

| Maker | OE number |
|---|---|
| Peugeot | 1609000680 |
| Peugeot | 1617535380 |
| Peugeot | 1619790880 |
| Peugeot | 1636413980 |
| Peugeot | 1678167980 |
| Peugeot | 1693587280 |

## Cross-references

| Brand | Art. no. |
|---|---|
| ATE | 13046038712 |
| Bosch | 0986424853 |
| febi bilstein | 16959 |
| Ferodo | FDB4680 |
| Hella Pagid | 355020991 |
| ATE | 603871 |
| Bosch | 0986424878 |
| Ferodo | FDB4680D |
| Hella Pagid | 355032361 |

## Why this one

- **99x50x18 mm**: Fits the Bosch caliper, WVA 25840.
- **Wear indicator**: Without a wear indicator.
- **Hardware included**: Anti-squeal shims, fitting accessories and caliper bolts in the box.
- **ECE R90 approved**: Prime friction material matched to the original pad for bite and wear.

## On the job

### The job it does

A complete rear axle set for the Peugeot 3008 1.5 BlueHDi. The pads measure 99 x 50 mm and are 18 mm thick, made to fit the Bosch caliper, and the friction material is ECE R90 approved and matched to the original for bite and wear. The box includes anti-squeal shims, fitting accessories and caliper bolts, so worn hardware does not go back on.

### Fitting it

Measure the discs while the wheels are off; if they are near the minimum thickness, replace them with the pads. There is no wear indicator, so check the lining thickness at every service. Clean and grease the caliper guides, push the piston back gently and bed the pads in with a few moderate stops.

## Specifications

### Brake pads

| Specification | Value |
|---|---|
| Width | 99 mm |
| Height | 50 mm |
| Thickness | 18 mm |
| Wear indicator | None |
| WVA number | 25840, 25839 |
| FMSI number | D1891 9119 |
| Fitting kit included | Yes |
| Chamfered / slotted | No |
| Anti-squeal shims | Yes |

**Technology:** [Prime line](https://car-parts-universe.superfast.shop/en/technology/prime-line.md)

## Documents

- [Technical data sheet P 61 122](https://www.bremboparts.com/europe/en/view-document/catalogue/pad/P_61_122)
- [Brake pad fitting instructions](https://www.bremboparts.com/europe/en/support/assembly-instructions/CarAM_Pad)

## Pack size

Branches deliver the same day; the central warehouse the next day.

| Pack size | SKU | EAN | EUR Net (excl. VAT) | Central warehouse | Oslo Alnabru | Bergen Kokstad | Trondheim Tiller | Stockholm Västberga | Gothenburg Hisings Backa | Rotterdam Waalhaven |
|---|---|---|---|---|---|---|---|---|---|---|
| Axle set | BRE-P61122 | 8020584111659 | €32.90 | 96 | 9 | 24 | 32 | 14 | 37 | 26 |

## Prices

Net prices exclude VAT; incl. VAT uses the market rate.

| Pack size | SKU | EUR Net (excl. VAT) | EUR Incl. VAT 21 % | NOK Net (excl. VAT) | NOK Incl. VAT 25 % | SEK Net (excl. VAT) | SEK Incl. VAT 25 % |
|---|---|---|---|---|---|---|---|
| Axle set | BRE-P61122 | €32.90 | €39.81 | NOK 385.00 | NOK 481.25 | SEK 368.00 | SEK 460.00 |

---

Web page: https://car-parts-universe.superfast.shop/en/brakes/brembo-brake-pad-set-p-61-122
Markdown version of this page, for language models. Prices are net (excl. VAT) unless marked incl. VAT.