
CRC Brakleen VOC Free brake cleaner
Non-flammable, water-rinsable brake cleaner with zero VOC
- Art. no.
- 1755363
- EAN
- 5412386072024, 5412386072864
- Brake cleaner
- Aerosol
SKU CRC-1755363 · EAN 5412386072024
Volume price
from 5 pcs · €87.40from 20 pcs · €82.80From the central warehouse — delivered next working day · Log in to see your branch’s delivery rounds.
Stock
Central warehouse · 99 · Next day
- Oslo Alnabru19
- Bergen Kokstad0
- Trondheim Tiller18
- Stockholm Västberga8
- Gothenburg Hisings Backa22
- Rotterdam Waalhaven34
Water-emulsifiable brake cleaner for bays where solvent vapour and fire risk are a concern. It contains 0 g/l VOC, is readily biodegradable and rinses off with water; sold in 400 ml cans and 2 × 5 l packs.
Fits
No vehicle list: check the specification against the vehicle or the handbook.
Specifications
Workshop chemical
- Type
- Brake cleaner
- Form
- Aerosol
- Chlorine-free
- — No
- Acetone-free
- — No
Hazard information
Hazard statements: H229
See the safety data sheet before use.
Documents
- TDSTechnical data sheet (English)Technical data sheeten
- TDSTechnical data sheet (Swedish)Technical data sheetsv
- SDSSafety data sheet, 400 ml aerosol (English)Safety data sheeten
- SDSSafety data sheet, 400 ml aerosol (Norwegian)Safety data sheetno
- SDSSafety data sheet, 400 ml aerosol (Swedish)Safety data sheetsv
- SDSSafety data sheet, bulk packs 2 × 5 l (Norwegian)Safety data sheetno
- SDSSafety data sheet, bulk packs 2 × 5 l (Swedish)Safety data sheetsv
Why this one
01
Not flammable
Water-based formula; the aerosol carries only the pressurised-can warning H229.
02
Zero VOC
0 g/l VOC and over 60 % biodegradable to OECD 301.
03
Plastic-friendly
Compatible with PU, HDPE, PVC, ABS and PS parts.
04
5 l refill
Also sold as 2 × 5 l cans for refillable pump sprayers.
On the job
Brake cleaning without solvent
VOC Free takes a different route from classic Brakleen: instead of a fast-flashing solvent it uses a water-emulsifiable formula with 0 g/l VOC. It is not flammable, so it suits enclosed bays, brakes that are still warm from a road test and workshops trying to cut their solvent stock. Spray it on, give it time to work, then rinse the loosened brake dust, fluid and grease away with water.
Where it fits in the job
The formula is compatible with PU, HDPE, PVC, ABS and PS, which helps around sensor housings, rubber boots and plastic covers, and it also cleans wheels and hubs. Because it leaves water behind rather than flashing off, let the parts dry before assembly. Finish the brake job with Braklube PRO on the slide pins and Copper Paste PRO on the hub face.






























