CRC Copper Paste PRO anti-seize spray
Copper anti-seize spray for exhaust studs, hubs and pad backs
- Art. no.
- 1031789
- EAN
- 5412386063756
- Copper / assembly paste
- Aerosol
SKU CRC-1031789 · EAN 5412386063756
Volume price
from 5 pcs · €119.70from 20 pcs · €113.40From the central warehouse — delivered next working day · Log in to see your branch’s delivery rounds.
Stock
Central warehouse · 113 · Next day
- Oslo Alnabru0
- Bergen Kokstad0
- Trondheim Tiller16
- Stockholm Västberga27
- Gothenburg Hisings Backa39
- Rotterdam Waalhaven15
Copper anti-seize compound in an aerosol with an agitator ball. It stops threads and mating faces from seizing or welding together and keeps its anti-seize effect up to about 1000 °C.
Fits
No vehicle list: check the specification against the vehicle or the handbook.
Specifications
Workshop chemical
- Type
- Copper / assembly paste
- Form
- Aerosol
- Chlorine-free
- — No
- Acetone-free
- — No
- Maximum temperature
- 1,000°C
Hazard information
- 02Flammable
- 07Harmful / irritant
- 09Environmental hazard
Hazard statements: H222, H229, H315, H336, H411
See the safety data sheet before use.
Documents
- TDSTechnical data sheet (English)Technical data sheeten
- TDSTechnical data sheet (Swedish)Technical data sheetsv
- SDSSafety data sheet, 250 ml aerosol (English)Safety data sheeten
- SDSSafety data sheet, 250 ml aerosol (Norwegian)Safety data sheetno
- SDSSafety data sheet, 250 ml aerosol (Swedish)Safety data sheetsv
Why this one
01
-30 to 1000 °C
Anti-seize effect from -30 °C up to about 1000 °C.
02
Micro-fine copper
Keeps metal surfaces apart and prevents welding and seizing.
03
Water-resistant film
Drip-free and resists hot water, rated 1-90 to DIN 51807.
04
High load capacity
Four-ball weld load of 260 daN.
On the job
Stops parts seizing together
Copper paste goes where metal parts sit together under heat and moisture: exhaust fasteners, spark plug threads, hub centering faces and the backs of brake pads. The micro-fine copper keeps the surfaces apart, so the part comes off next time instead of snapping or needing heat. It lubricates up to 300 °C and keeps its anti-seize effect to about 1000 °C.
Spray instead of brush
The aerosol lays down a thin, even coat on hub faces and threads without a brush and a messy tin. Shake it until the agitator ball moves freely before use. The film resists hot water, does not drip and scores 0/0 in the DIN 51802 corrosion test. On a disc change, clean the hub with Brakleen PRO first, then coat the centering face lightly.
